Integrated Dart Flights Guide

Integrated dart flight systems combine the flight and shaft, so you buy the complete unit in your chosen shape and length. Start with a setup close to the one you already use, then test one change at a time.

Which systems are integrated?

• Target K-Flex moulds the flight and shaft together.
• Condor AXE is also a combined flight-and-shaft system, with different named shapes and lengths.
• Target K-Shift No.2 and No.6 use a connection designed to allow movement on contact.

Is L-Style an integrated flight-and-shaft system?

L-Style moulded flights fit onto separate compatible shafts. An EZ flight's integrated Champagne Ring does not mean the shaft is part of the flight. Check the exact L-Style flight, ring and shaft combination before ordering. Cosmo Fit Flights likewise need compatible Fit Shafts.

Choose shape first, then length

For K-Flex, No.2 is the larger profile and No.6 is smaller. Keep shaft length the same when comparing the two shapes. If you change both at once, it is harder to tell which change affected the setup.

Compare the actual measurement in millimetres across brands. K-Flex's core listings use 19mm, 26mm and 33mm lengths; the Condor AXE Small and Wing Slim listings use 21.5mm, 27.5mm and 33.5mm without the thread. The length labels are not interchangeable.

Before you buy

• Confirm the barrel's rear thread matches the selected system.
• Check the flight shape, shaft length and pack contents on the product page.
• Check that your case can hold the assembled flight shape without crushing it.
• Do not add a separate folding flight or flight ring to a complete integrated unit.

Browse integrated flights and shafts, read the K-Flex, Condor AXE and K-Shift comparison, or use our compatibility table and setup test.